Reception Window on Architectural Floor Plans Drawings
Drafting Standards for Interior Elevations
Interior elevations are drafted to conspicuously indicate surfaces, edges, and the intersections of materials and forms. The height is drawn to scale, with the limits of the ceiling, flooring, and adjacent walls (or other forms) shown with a nighttime outline. At that place are ii basic methods that professional person firms use to draw interior elevations. These methods are illustrated in Figure 7-10. The first method is to outline all the elements (such as cabinets, beams, soffits, etc.) that project toward the viewer and establish the limits of the wall elevation, as shown in Effigy 7-11. The other method depicts these items in cross-section, oftentimes showing construction details, materials, and other hidden items. This method is useful this side of cartoon uses an outline to profile objects that run into the wall plane
Figure seven-10 This elevation drawing shows two methods for cartoon the limits of an top. The left side traces the outline of a cabinet side by side to the wall, whereas the right side cuts through the cabinet, revealing its interior construction.
this side of cartoon uses an outline to profile objects that run across the wall plane
Figure seven-ten This pinnacle drawing shows two methods for drawing the limits of an height. The left side traces the outline of a cabinet side by side to the wall, whereas the right side cuts through the cabinet, revealing its interior structure.
this side of cartoon shows a section thru objects that are close to the wall plane wood blocking by general contractor
■ adaptable shelves
■ i' thick (25; fabric wrapped acoustical panels see wood blocking bt general contractor this side of drawing shows a section thru objects that are shut to the wall plane wood blocking by general contractor
■ adjustable shelves
■ i' thick (25; fabric wrapped acoustical panels see forest blocking bt general contractor
RECEPTION DE6K - Superlative
scale; h'.fifty'-e for explaining the details of an next object (a cabinet interior, for example) without having to generate a split up drawing elsewhere. See Figure seven-12 for an example of this type of drawing. The choice betwixt these techniques is dependent upon the complication of the interior, the information that needs to exist conveyed, and the established role standards.
Drawing interior elevations does not always follow a rigid set of architectural rules. Decorative elements or embellishment may need to be added to convey the character of the infinite. Many interior designers and architects take some liberty with elevations to convey important features, even if that means departing from "architecturally correct" drafting standards. For case, wall coverings,
FAINTED GYP. BD.
WOOD CAP (MAPL In a higher place UPPER CABINETS
NAT. MAPLE CABINETS CTYP.)
CER. TILE BACKSPLASh
CORIAN BACKSPLASH
CORIAN COUNTERTOP
NAT. MAPLE CABINETS (TYP.)
FAINTED GYP. BD.
Forest CAP (MAPL Above UPPER CABINETS
CER. TILE BACKSPLASh
CORIAN BACKSPLASH
CORIAN COUNTERTOP
NAT. MAPLE CABINETS (TYP.)
FREEZVREF.
STOVE/OVEN
Figure 7-11 The cabinetry in this wall meridian is shown in outline form, rather than with its interior construction.
FREEZVREF.
FAINTED GYP. BD.
Forest CAP (MAPLE) ABOVE UPPER CABINET5
NAT. MAPLE CABINETS CTYP.) CER. TILE BACKSPLASH
NAT. MAPLE CABINETS CTYP.)
STOVE/OVEN
Figure 7-eleven The cabinetry in this wall tiptop is shown in outline form, rather than with its interior construction.
FAINTED GYP. BD.
Forest CAP (MAPLE) Higher up UPPER CABINET5
NAT. MAPLE CABINETS CTYP.) CER. TILE BACKSPLASH
NAT. MAPLE CABINETS CTYP.)
Figure 7-12 In this elevation, the adjacent cabinets are drawn showing their interior construction.
trac-calorie-free run into elec. program
12'-0" soffit curome curtain rod
pre-fab partial-ff-2;over gyp. Board
pt uuall across bd. over 3 mtl. studs ® sixteen" o.c. typ.
finism floor -see finisw program
UJALL SECTION 0 DRAPERY
Figure 7-14 Dashed lines are drawn in an height to show the direction doors open up. The dashed lines at the mid-point bespeak the hinge side.
Figure 7-14 Dashed lines are drawn in an peak to prove the direction doors open up. The dashed lines at the mid-point point the hinge side.
BAjtt mm ion
BAjtt mm ion
Effigy 7-13 This wall section shows the drapery and wall beyond in elevation view.
finishes, drapery treatments, or other decorative elements might be indicated on the drawing, equally illustrated in Figure vii-13.
Generally, when drawing interior elevations of doors, windows, and born cabinetry, such every bit in a kitchen, bath, or part, dashed lines are used to point hinge location and door swings, as shown in Figure seven-xiv. The angled dashed line near the midpoint of the door points to the swivel side.
In theory, construction drawings include a sail (or more) defended specifically to interior elevations. In practice, however, this is not always the example. A pocket-size project with seven or eight interior ele vations may non warrant a dissever sheet, and so the elevations are drawn with other details in the construction set. Sometimes on small projects that involve built-in cabinetry, it is advantageous to place the interior elevations on the aforementioned sheet equally the flooring plan if space permits. This style, the elevations can be studied without flipping sheets back and forth. The actual number of interior elevations is proportional to the complication of the project. On large, complex projects, interior elevations may exist placed together on ane or more sheets and referenced back to the floor plans, equally illustrated in Effigy 7-15.
-
- Figure vii-15 Interior elevations of a project are grouped together on one sail and cross-referenced, beneath each drawing, to the floor programme. The scale is the same for all elevations and noted as such on the lower right side.
Figure 7-16 Interior elevations tin can be named according to the compass direction the viewer is facing.
| V/ | / | due west | « | ||
| i | i | i | t |
| /r/ | /U | ||||
| êl ill lmrnr | m il | M | à | fH | È |
Continue reading here: Designation of Materials
Was this article helpful?
Source: https://www.northernarchitecture.us/construction-drawings/drafting-standards-for-interior-elevations.html
0 Response to "Reception Window on Architectural Floor Plans Drawings"
Post a Comment